Date: September 21, 1997 at 13:17:42
Follow Ups:
From: Brian, [Local SpiceIslander]
URL: The Subwoofer DIY Page v1.1
Subject: Re: Sealed Boxes
The answer depends on the T/S parameters for your speakers, as these parameters will dictate the box size required to get the best results.
Usually the T/S parameters are provided in the documention you got with the speakers, or perhaps you can get them directly from the manufacturer.
If you want to try the "wet finger in the air" approach, a 0.75 cu.ft. box for each driver, tuned to taste with fiberglass stuffing in each box, may produce good results.
Regards,
Brian
Follow Ups: