The Subwoofer DIY Page v1.1
[ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]

Choosing a system
Sealed Systems
Ported Systems
Passive Radiator Systems
4th Order Bandpass Systems
6th Order Bandpass Systems
Transmission Line Systems
Dipole Systems
Car Audio Subwoofers

[Previous Message] [Next Message]

Date: July 14, 2014 at 16:54:19
From: JBooM, [172-9-68-54.lightspeed.frokca.sbcglobal.net]
Subject: old school stroker 18 inch in a sealed encosure.


I want to put an old school Stroker 18 in a 3.5 cubic feet sealed enclosure box. The Manual says it needs almost 5 cubic feet for a ported box. Do you think the stroker will sound good in this size box. Also What if I put one or possibly two 18 inch passive radiators on the back of this box? Would I be able to tune it to a descent frequency?

Here is the link to the manual. I have the 18D model.

http://www.rollmeover.com/bronco_fab/am ... Manual.pdf

Thanks for your help.
Moderated By: brian@diysubwoofers.org


Posted with TalkShop version 2.77 BETA

[Previous Message] [Next Message]




Follow Ups:

[ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]


websmall.gif (584 bytes)