The Subwoofer DIY Page v1.1
[ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]

Choosing a system
Sealed Systems
Ported Systems
Passive Radiator Systems
4th Order Bandpass Systems
6th Order Bandpass Systems
Transmission Line Systems
Dipole Systems
Car Audio Subwoofers

[Previous Message] [Next Message]

Date: April 20, 2014 at 09:11:54
From: prasi, [117.195.33.168]
Subject: Help in building subwoofer for home with Dayton Audio SD270A-88 10"


Hi I am planning to build a ported subwoofer for home
audio with SD270A-88 10" DVC Subwoofer driver
(http://www.parts-express.com/dayton-audio-sd270a-88-
10-dvc-subwoofer--295-486). I have made simulations
with Unibox software.The box will be 80 ltrs tuned to
24.2Hz with port dia of 7cm and length of 19cm, with F3
of 28.3Hz. Is it correct ? and also with room gain, can
I safely assume that I may get reasonable extension up
to 20 Hz.?

Moderated By: brian@diysubwoofers.org


Posted with TalkShop version 2.77 BETA

[Previous Message] [Next Message]




Follow Ups:

[ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]


websmall.gif (584 bytes)