The Subwoofer DIY Page v1.1
[ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]

Choosing a system
Sealed Systems
Ported Systems
Passive Radiator Systems
4th Order Bandpass Systems
6th Order Bandpass Systems
Transmission Line Systems
Dipole Systems
Car Audio Subwoofers

[Previous Message] [Next Message]

Date: March 07, 2014 at 09:53:50
From: Blaukopf, [80-219-199-165.dclient.hispeed.ch]
Subject: tapped with a kind of push-pull configuration


Hey guys, I have modeled a tapped horn ( 360 cm ) with
a 12" driver, it looks fine. After seeing the mega-TH
by Trackzilla with 4 push-pull woofers I wondered if it
is a. possible to add a second identical woofer on the
opposite side of the throat chamber facing the first
one (like an offset driver) b. how this could be
modeled in hornresp and c. if this push-pull
configuration has been tried before. Thanks a lot for
your reponse !
Moderated By: brian@diysubwoofers.org


  • View entire thread
  • Posted with TalkShop version 2.77 BETA

    [Previous Message] [Next Message]




    Follow Ups:

    [ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]


    websmall.gif (584 bytes)