The Subwoofer DIY Page v1.1
[ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]

Choosing a system
Sealed Systems
Ported Systems
Passive Radiator Systems
4th Order Bandpass Systems
6th Order Bandpass Systems
Transmission Line Systems
Dipole Systems
Car Audio Subwoofers

[Previous Message] [Next Message]

Date: January 22, 2014 at 09:15:44
From: don durkes, []
Subject: Nakamichi Sound Stage 5 Subwoofer

I just repaired the drivers in both speakers and notice the dramatic need for a subwoofer. I can solder and do woodworking, so that part is covered. Designing the electronics is a different issue. I think a 10" driver would be sufficient. There is a standard output jack provided so no proprietary connectors needs.

Besides the enclosure, connectors and driver, what would I need to build this? I also have the service manual if that helps). Thanks!

Moderated By:

Posted with TalkShop version 2.77 BETA

[Previous Message] [Next Message]

Follow Ups:

[ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]

websmall.gif (584 bytes)