The Subwoofer DIY Page v1.1
[ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]

Choosing a system
Sealed Systems
Ported Systems
Passive Radiator Systems
4th Order Bandpass Systems
6th Order Bandpass Systems
Transmission Line Systems
Dipole Systems
Car Audio Subwoofers

[Previous Message] [Next Message]

Date: October 22, 2013 at 18:12:38
From: Brian, [69.80.50.18]
Subject: Re: 4th order bandpass symbols


It's explained near the top of the same page.

if S = 0.7, then b = 0.7206, passband ripple = 0.00 dB
if S = 0.6, then b = 0.9560, passband ripple = 0.35 dB
if S = 0.5, then b = 1.2712, passband ripple = 1.25 dB


  • View the previous message in this thread
  • Go to the top of this thread
  • View entire thread
  • Posted with TalkShop version 2.77 BETA

    [Previous Message] [Next Message]




    Follow Ups:

    [ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]


    websmall.gif (584 bytes)