The Subwoofer DIY Page v1.1
[ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]

Choosing a system
Sealed Systems
Ported Systems
Passive Radiator Systems
4th Order Bandpass Systems
6th Order Bandpass Systems
Transmission Line Systems
Dipole Systems
Car Audio Subwoofers

[Previous Message] [Next Message]

Date: October 15, 2013 at 17:48:20
From: Brian, []
Subject: Re: Amazing carver loudspeaker woofers as DIY project

I don't think the baffle shape should make that much of a difference, within reason of course.

And yes, you can use two per side, but baffle size should remain the same, i.e. don't cut the baffle in half because you're using half the number of drivers, LOL.

On the wiring, I'm not sure - you may have to measure one of them to determine its impedance and then wire them up accordingly.

  • View the previous message in this thread
  • Go to the top of this thread
  • View entire thread
  • Posted with TalkShop version 2.77 BETA

    [Previous Message] [Next Message]

    Follow Ups:

    [ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]

    websmall.gif (584 bytes)