The Subwoofer DIY Page v1.1
[ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]

Choosing a system
Sealed Systems
Ported Systems
Passive Radiator Systems
4th Order Bandpass Systems
6th Order Bandpass Systems
Transmission Line Systems
Dipole Systems
Car Audio Subwoofers

[Previous Message] [Next Message]

Date: May 31, 2012 at 04:13:44
From: Jason, []
Subject: Help with understanding slot ports


I have a T1D212 / Rockford Fosgate T1. I want to build a slot ported box. I want it to be, (H=13 W=19 D=17). I want it tuned to 37hz. I want to port to be W=1.5-2inch H=11.5. Port can be up to 2 inches wide.

While just giving me the length of the port helps. Will someone please write up all the equations using the T1 specs. I would like to learn how this is done for future use. I posted a link to the T1 specs from rockfords website. Any and all help is greatly appreciated thank you.
Moderated By:

Posted with TalkShop version 2.77 BETA

[Previous Message] [Next Message]

Follow Ups:

[ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]

websmall.gif (584 bytes)