The Subwoofer DIY Page v1.1
[ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]

Choosing a system
Sealed Systems
Ported Systems
Passive Radiator Systems
4th Order Bandpass Systems
6th Order Bandpass Systems
Transmission Line Systems
Dipole Systems
Car Audio Subwoofers

[Previous Message] [Next Message]

Date: June 29, 2010 at 01:28:59
From: andrewt, [host86-160-41-234.range86-160.btcentralplus.com]
Subject: Re: 6 sub wiring


buy a third channel and run two drivers from each channel.

or string three together in series and then parallel two strings to give a 6ohm load

or string two together in series and then parallel three strings to give a 2.7ohm load.

Will your bridged amp drive a 2ohm load? or is it rated for 4ohm duty when bridged?


  • View the previous message in this thread
  • Go to the top of this thread
  • View entire thread
    		•

    Posted with TalkShop version 2.77 BETA

    [Previous Message] [Next Message]



    Follow Ups:

    [ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]


    websmall.gif (584 bytes)