The Subwoofer DIY Page v1.1
[ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]

Choosing a system
Sealed Systems
Ported Systems
Passive Radiator Systems
4th Order Bandpass Systems
6th Order Bandpass Systems
Transmission Line Systems
Dipole Systems
Car Audio Subwoofers

[Previous Message] [Next Message]

Date: October 06, 2009 at 06:18:48
From: pharsyd, [bas1-toronto01-1177659031.dsl.bell.ca]
Subject: TC-3000 dual sub build


OK, just looking for some help here. Only built one other Sub before so still more than new at this. I have 2 TC-3000 15" subs (cannot find parameters for them), Velodyne SMS-1 for eq, and a crown CTS 3000 to power them. I wanted to know if i could build these boxes like my Tumult MKII build which was a 1.5" thick cube? the tumult was a 21" interior sized cube if i remember correctly with no internal bracing. So can i do the same for these, and also how much stuffing would i need for them as well? I have read about 1 lb per cubic foot, sound correct? I hope this doesnt sound too jumbled or incorrect. Thank you for any advice.
Moderated By: brian@diysubwoofers.org


  • View entire thread
  • Posted with TalkShop version 2.77 BETA

    [Previous Message] [Next Message]




    Follow Ups:

    [ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]


    websmall.gif (584 bytes)