The Subwoofer DIY Page v1.1
[ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]

Choosing a system
Sealed Systems
Ported Systems
Passive Radiator Systems
4th Order Bandpass Systems
6th Order Bandpass Systems
Transmission Line Systems
Dipole Systems
Car Audio Subwoofers

[Previous Message] [Next Message]

Date: September 05, 2009 at 10:38:58
From: andrewt, [host217-42-27-149.range217-42.btcentralplus.com]
Subject: Re: How to convert an powered subwoofer to a passive one


look up Linkwitz lab or ESP to find circuits for an active low pass filter to insert into the feed to the power amplifier.
The Power amplifier will drive the speaker directly, no crossover is required.


  • View the previous message in this thread
  • Go to the top of this thread
  • View entire thread
    		•

    Posted with TalkShop version 2.77 BETA

    [Previous Message] [Next Message]



    Follow Ups:

    [ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]


    websmall.gif (584 bytes)