[Previous Message]
[Next Message]
|
| Date: |
July 21, 2009 at 04:41:23 |
| From: |
Chuck, [220-128-220-175.hinet-ip.hinet.net] |
| Subject: |
Subwoofer definition for noob |
|
|
|
|
Hi, would really appreciate some help. I want to understand how a particular type of subwoofer works. To start with I need to know the system's proper name. The system is where you have a long square box enclosure with an upside down V shape of boards effectively creating two equal volume chambers in the enclosure under the driver. The port is slot along the ridge of the V directly under the driver width. The V shape runs from the corner of the enclosure to almost directly under the center line of the driver.
Looking side-on to a vertically standing speaker system (with the driver firing up to the ceiling and the port firing down to the floor) it might appear as:
|--| driver
|/\| enclosure
Can someone please tell this type of system's proper name and perhaps point me in the right direction to research and define how it works?
Thanks!
Chuck.
Moderated By: brian@diysubwoofers.org
|
|
|
| View entire thread |
Posted with TalkShop version
2.77 BETA |
[Previous Message]
[Next Message]
|
|
|
Follow Ups: |
|
|
|
[
The Subwoofer DIY Page - Discussion Forum ] [ FAQ ] |
|
