The Subwoofer DIY Page v1.1
[ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]

Choosing a system
Sealed Systems
Ported Systems
Passive Radiator Systems
4th Order Bandpass Systems
6th Order Bandpass Systems
Transmission Line Systems
Dipole Systems
Car Audio Subwoofers

[Previous Message] [Next Message]

Date: July 05, 2009 at 06:49:55
From: andrewt, [host86-146-49-216.range86-146.btcentralplus.com]
Subject: Re: help please, how to connect a passive sub to mixer/active...


take the wideband signal from your source into a low pass filter.
Feed the output from the low pass filter to the input of the bass amplifier.
Feed the output of the bass amplifier to the input of the bass speaker.
Adjust the low pass filter gain and slope and turnover frequency until you get the sound you need.


  • View the previous message in this thread
  • Go to the top of this thread
  • View entire thread
    		•

    Posted with TalkShop version 2.77 BETA

    [Previous Message] [Next Message]



    Follow Ups:

    [ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]


    websmall.gif (584 bytes)