The Subwoofer DIY Page v1.1
[ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]

Choosing a system
Sealed Systems
Ported Systems
Passive Radiator Systems
4th Order Bandpass Systems
6th Order Bandpass Systems
Transmission Line Systems
Dipole Systems
Car Audio Subwoofers

[Previous Message] [Next Message]

Date: April 05, 2009 at 21:11:35
From: Brian, [65.48.136.161]
Subject: Re: Isobaric loading in vented box


This might help...

If you're going isobaric:

1.Decrease NET box volume by 50% (compared to alignment using ONE woofer)

2. Fb should remain the same (this will mean that you will have to use longer ports).


  • View the previous message in this thread
  • Go to the top of this thread
  • View entire thread
    		•

    Posted with TalkShop version 2.77 BETA

    [Previous Message] [Next Message]



    Follow Ups:

    [ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]


    websmall.gif (584 bytes)