The Subwoofer DIY Page v1.1
[ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]

Choosing a system
Sealed Systems
Ported Systems
Passive Radiator Systems
4th Order Bandpass Systems
6th Order Bandpass Systems
Transmission Line Systems
Dipole Systems
Car Audio Subwoofers

[Previous Message] [Next Message]

Date: August 11, 2008 at 11:47:06
From: Murilo, [200.198.82.34]
Subject: Any counter-advices for this hiper car project?


I'm making a kind of "exagerated" project for my car. Currently planning the 3-way front system, which should exceed 120 dB from 70 Hz and up.

- 3 CSS SDX7 midbasses
... 35-350 Hz
... 17 L sealed in front of each front seat (below knee)

- 2 high efficiency 6" midbass near each foot space running
... 350-4000 Hz
... Qts of 0,22
... Fs of 125
... 8 ohm (each)

- 1 professional super tweeter in each corner
... 105 dB/w efficiency
... 8 Ohm


My questions are about some uncommon things:

1 - Is it bad to use two independent passive crossovers in same amplifer? Reason is that the combined mid-range impedance isn't the same as the tweeter impedance.

2 - Would it be annoying to use a professional super tweeter in a car? It has 40 x 40 degrees angularity (directivity). Should I use two in each side for bigger angularity?

3 - Any bad thoughts about a mid-bass enclosure below the knees (right in front of the front seats)?


  • View entire thread
  • Posted with TalkShop version 2.77 BETA

    [Previous Message] [Next Message]




    Follow Ups:

    [ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]


    websmall.gif (584 bytes)