The Subwoofer DIY Page v1.1
[ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]

Choosing a system
Sealed Systems
Ported Systems
Passive Radiator Systems
4th Order Bandpass Systems
6th Order Bandpass Systems
Transmission Line Systems
Dipole Systems
Car Audio Subwoofers

[Previous Message] [Next Message]

Date: July 23, 2008 at 19:52:03
From: Tim, [cpe-74-75-72-221.maine.res.rr.com]
Subject: Re: subs. for Klipsch Corns./Zoktoberfest


Thanks so much for your help & knowledge Z.My listening room is really 2 rooms that run into each other.It runs 42" long,16" wide & 10" high.I've pretty much decided to get another Tekton while I can.I guess they're out of Italy & are'nt imported anymore,but the guy I got the 1st one from has another new in box that I can get for $400(they retail for $1150-$1200).Unless you see a clear benifit to putting both in one cab.,I'm going to build 2 12 cu. ft. cabs.A 24 cu. ft. cab. is just to big.I plan on powering each w/ a bridged Adcom 555ll(600 WPC.) & an external Reeckhorn x-over.Since I can control volume on each sub.,do you feel building the 2 is'nt overkill or is going to overwhelm my 2 Klipsch Lascalas?Is there anything you can think of that I should know before I start cutting the plywood?Thanks again for the help!P.S.Do you have any idea of what material I should use for baffle & how much I should use?Thanks,Tim.


  • View the previous message in this thread
  • Go to the top of this thread
  • View entire thread
  • Posted with TalkShop version 2.77 BETA

    [Previous Message] [Next Message]




    Follow Ups:

    [ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]


    websmall.gif (584 bytes)