[Previous Message]
[Next Message]
|
| Date: |
July 05, 2008 at 13:15:33 |
| From: |
Freq Freak, [24-159-201-39.dhcp.roch.mn.charter.com] |
| Subject: |
Re: I recognise 2 bass types |
|
|
|
|
Interesting, that puts the chambers in a different arrangement from the 6th order I was thinking about. Either way, all that does is add a second Helmholtz resonator to the ported system, giving it a second tuning frequency. It would increase power handling in the passband, but adding another resonator would also steepen the roll off below the lowest resonance. If one were to build such an alignment, I'd recommend a steep 'rumble filter' just below tuning to avoid an enthusiastic driver failure :).
I can be contacted off-list at: soundguy at byron dot com.
Freq Freak
|
|
|
| View the previous message in this thread
Go to the top of this thread
View entire thread |
Posted with TalkShop version
2.77 BETA |
[Previous Message]
[Next Message]
|
|
|
Follow Ups: |
|
|
|
[
The Subwoofer DIY Page - Discussion Forum ] [ FAQ ] |
|
