[Previous Message]
[Next Message]
|
| Date: |
July 04, 2008 at 07:42:12 |
| From: |
Jamo, [60-241-213-223.static.tpgi.com.au] |
| Subject: |
Peerless 12 XLS rebuild |
|
|
|
|
My previous attempt to build a decent enclosure for a Peerless 12 inch XLS subwoofer failed when in action at a party that almost blew the top off the sub...literally.
I've decided to improve bracing/sealing and port the enclosure. The enclosure currently measures (with the bracing I'm adding) 57.33L. At a calculated optimal frequency of 23.5 Hz a 3 inch (7.6cm) diameter port needs to be around 14.5 inchs (37cm) long to tune correctly.
Is anyone able to confirm my calculations before I cut holes in my sub box? Also, where do I put the port? Can I put it on the side of the enclosure?
Any help is appreciated
|
|
|
| View entire thread |
Posted with TalkShop version
2.77 BETA |
[Previous Message]
[Next Message]
|
|
|
Follow Ups: |
|
|
|
[
The Subwoofer DIY Page - Discussion Forum ] [ FAQ ] |
|
