The Subwoofer DIY Page v1.1
[ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]

Choosing a system
Sealed Systems
Ported Systems
Passive Radiator Systems
4th Order Bandpass Systems
6th Order Bandpass Systems
Transmission Line Systems
Dipole Systems
Car Audio Subwoofers

[Previous Message] [Next Message]

Date: March 25, 2008 at 14:24:21
From: Ken MacMillan, [webcache1.edu.pe.ca]
Subject: Re: Installing an amp in a passive 10" Paradigm sb-100 sub


The Paradigm PB-100 passive sub has 2 bottom ports.
It is apparently a dual voice coil sub.

It has two inputs (one for the left and one for the right) with + and - posts on both.

Do I have to rip the cross over out of this?

What about the dual voice coils. I probably should connect to both posts from the amp?

later,
ken


  • View the previous message in this thread
  • Go to the top of this thread
  • View entire thread
    		•

    Posted with TalkShop version 2.76 BETA

    [Previous Message] [Next Message]



    Follow Ups:

    [ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]


    websmall.gif (584 bytes)