The Subwoofer DIY Page v1.1
[ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]

Choosing a system
Sealed Systems
Ported Systems
Passive Radiator Systems
4th Order Bandpass Systems
6th Order Bandpass Systems
Transmission Line Systems
Dipole Systems
Car Audio Subwoofers

[Previous Message] [Next Message]

Date: March 21, 2008 at 09:32:53
From: shock66, [pool-96-233-186-220.spfdma.east.verizon.net]
Subject: Re: Usable Mach yields ridiculously long ports


I'm sorry, I meant 0.1. Got confused because it shows up on the plot in WinISD Pro as "1, 2," etc.

So that being said, is there any situation where a vent mach of above 0.15 is acceptable? I can't really have a vent that's a meter long for a speaker box that's only 50cm! :)

Thanks again.


  • View the previous message in this thread
  • Go to the top of this thread
  • View entire thread
    		•

    Posted with TalkShop version 2.76 BETA

    [Previous Message] [Next Message]



    Follow Ups:

    [ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]


    websmall.gif (584 bytes)