The Subwoofer DIY Page v1.1
[ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]

Choosing a system
Sealed Systems
Ported Systems
Passive Radiator Systems
4th Order Bandpass Systems
6th Order Bandpass Systems
Transmission Line Systems
Dipole Systems
Car Audio Subwoofers

[Previous Message] [Next Message]

Date: February 28, 2008 at 14:34:50
From: shock66, [96.240.187.30]
Subject: Re: design suggestions for Radio Shack DVC sub


Of course, if you're hooking it into your computer I assume you already have an amp to drive it? Otherwise you're going to have to get a little amp for it or something...

Looks like you should make a ported enclosure for it. Try the PORTED.XLS spreadsheet on this site, or this (http://www.mhsoft.nl/spk_calc.asp#ported) for easy calculations.


  • View the previous message in this thread
  • Go to the top of this thread
  • View entire thread
    		•

    Posted with TalkShop version 2.76 BETA

    [Previous Message] [Next Message]



    Follow Ups:

    [ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]


    websmall.gif (584 bytes)