The Subwoofer DIY Page v1.1
[ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]

Choosing a system
Sealed Systems
Ported Systems
Passive Radiator Systems
4th Order Bandpass Systems
6th Order Bandpass Systems
Transmission Line Systems
Dipole Systems
Car Audio Subwoofers

[Previous Message] [Next Message]

Date: February 05, 2008 at 20:32:51
From: norman bates, [oproxy.rockwellcollins.com]
Subject: qts near .41


Speaker Stats
fs 23.2 hz
vas 4.7 ft3
qts 0.41

Qtc .707
VB = 2.38 Ft3
fsb = 40.01 hz
F3 = 40.01 hz
I like this setup...........

Standard ported
vb 4.96 ft3
f3 22.66 hz
tune 22.82 hz
db peak 0.08
4" Port, length 10.19" long
nice and deep but watch for excursion near 30hz.....

or for protection
qtc 1.1
VB = 0.76 Ft3
fsb = 62.24 hz
F3 = 47.10 hz

I'd run sealed 1ft3 to 2.4ft3...........


  • View the previous message in this thread
  • Go to the top of this thread
  • View entire thread
    		•

    Posted with TalkShop version 2.76 BETA

    [Previous Message] [Next Message]



    Follow Ups:

    [ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]


    websmall.gif (584 bytes)