[Previous Message]
[Next Message]
|
| Date: |
December 15, 2007 at 06:36:20 |
| From: |
andrewt, [host86-134-169-70.range86-134.btcentralplus.com] |
| Subject: |
Re: Can I change a 3 way cabinet to a subwoofer |
|
|
|
|
Could you get decent results? Maybe.
Would you? Probably not.
You will need to select the driver to get the best from the box, you may have to go through hundreds of drivers/T/S parameters to find any that may make a good companion.
Normally you approach this from the other direction. Select the driver, model the T/S parameters with box/tuning then build box and test/adjust.
The sub- should work at lower frequencies than a bas speaker. The 3way box may be too small to get reasonable efficiency from most drivers.
|
|
|
| View the previous message in this thread
Go to the top of this thread
View entire thread |
Posted with TalkShop version
2.76 BETA |
[Previous Message]
[Next Message]
|
|
|
Follow Ups: |
|
|
|
[
The Subwoofer DIY Page - Discussion Forum ] [ FAQ ] |
|
