The Subwoofer DIY Page v1.1
[ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]

Choosing a system
Sealed Systems
Ported Systems
Passive Radiator Systems
4th Order Bandpass Systems
6th Order Bandpass Systems
Transmission Line Systems
Dipole Systems
Car Audio Subwoofers

[Previous Message] [Next Message]

Date: September 05, 2007 at 12:44:07
From: Scott, [160.254.108.24]
Subject: XJ-12 vs Dayton 12

URL: http://www.acoustic-visions.com/~acoustic/products/subwoofer_amplifiers/part


I plan on building a sub based more or less on the "Rump Thumper III" plans. However, I'm considering substituting the XJ-12* (acoustic-visions.com) for the Dayton. Actually I'm not sure which Dayton 12 would work best. It appears there are several. Also Is there a Port with a screw cap - in case it sounds better sealed? Many thanks, Scott

XJ-12* specs:

Re: 3.95
fs: 31Hz
Qms: 4.35
Qes: .67
Qts: .58
mms: 114g
cms: .233 mm/N
Vas: 83L
BL: 11.4
Eff: 87.7db/1W/1M
xmax: 26-27mm one way


  • View entire thread
    		•

    Posted with TalkShop version 2.76 BETA

    [Previous Message] [Next Message]



    Follow Ups:

    [ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]


    websmall.gif (584 bytes)