The Subwoofer DIY Page v1.1
[ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]

Choosing a system
Sealed Systems
Ported Systems
Passive Radiator Systems
4th Order Bandpass Systems
6th Order Bandpass Systems
Transmission Line Systems
Dipole Systems
Car Audio Subwoofers

[Previous Message] [Next Message]

Date: March 19, 2007 at 07:11:15
From: andrewt, [193.39.158.195]
Subject: Re: BL question (only one this time)


BL=strength of flux in the magnetic gap times the length of voice coil in the magnetic gap (approximately).
Since we all want good quality sound output we never drive our voice coils out of the gap, so Xmax becomes our sensible limit. By definition, BL should be almost constant when excursion is still within the limits of Xmax.


  • View the previous message in this thread
  • Go to the top of this thread
  • View entire thread
  • Posted with TalkShop version 2.76 BETA

    [Previous Message] [Next Message]




    Follow Ups:

    [ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]


    websmall.gif (584 bytes)