The Subwoofer DIY Page v1.1
[ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]

Choosing a system
Sealed Systems
Ported Systems
Passive Radiator Systems
4th Order Bandpass Systems
6th Order Bandpass Systems
Transmission Line Systems
Dipole Systems
Car Audio Subwoofers

[Previous Message] [Next Message]

Date: December 05, 2005 at 20:15:55
From: norman bates, [oproxy.rockwellcollins.com]
Subject: small xmax, bass driver not subwoofer driver, he's right


sealed box qtc .707
VB = 1.94 Ft3
fsb = 89.08 hz
F3 = 89.10 hz

or

max flat ported
vb 3.95 ft3
f3 46.13 hz
tune 50.58 hz
db peak 0.09
cut a 4" diameter hole in 0.43 thick wood for port
cut 4.5" diameter hole if in a 1" thick wood

Yea so a not too deep driver better for a 3-way or not 500-600hz 2-way horn thingy



  • View the previous message in this thread
  • Go to the top of this thread
  • View entire thread
    		•

    Posted with TalkShop version 2.76 BETA

    [Previous Message] [Next Message]



    Follow Ups:

    [ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]


    websmall.gif (584 bytes)