The Subwoofer DIY Page v1.1
[ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]

Choosing a system
Sealed Systems
Ported Systems
Passive Radiator Systems
4th Order Bandpass Systems
6th Order Bandpass Systems
Transmission Line Systems
Dipole Systems
Car Audio Subwoofers

[Previous Message] [Next Message]

Date: May 02, 2005 at 19:50:50
From: Pete Schumacher, [commons10k1.mo24.107.56.72.charter-stl.com]
Subject: Re: Car Subwoofer instalation?


Those pyramid subs need sealed enclosures. The volume of the storage compartment is HUGE (>9 cubic feet!). That's more than enough for both of those 15's. If you can stiffen the compartments with some kind of resin and bracing, they would do fine. If you can't, remove one compartment and build an enclosure to fit. Fully stuff it with fiber and you'll be ready to go.


  • View the previous message in this thread
  • Go to the top of this thread
  • View entire thread
  • Posted with TalkShop version 2.76 BETA

    [Previous Message] [Next Message]




    Follow Ups:

    [ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]


    websmall.gif (584 bytes)