The Subwoofer DIY Page v1.1
[ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]

Choosing a system
Sealed Systems
Ported Systems
Passive Radiator Systems
4th Order Bandpass Systems
6th Order Bandpass Systems
Transmission Line Systems
Dipole Systems
Car Audio Subwoofers

[Previous Message] [Next Message]

Date: March 24, 2005 at 21:56:18
From: Ardemus, [adsl-63-202-145-138.dsl.snlo01.pacbell.net]
Subject: Re: Basic - High end sub, considering sealed dual small drivers...

URL: Scan Speak 23w_4557t00


This is kinda expensive, but how's this?

2x 10 in a 2.0 cu' sealed enclosure with 1-2 lbs of fiberfill. Using the Scanspeak Subwooofer (I wonder how this would work with their passive instead of a 2nd active):

Scan Speak - 23W/4557T00 10"
Vas 91.200 (for two)
Qts 0.470
Qes 0.520
fs 20.500
Xmax 13.000
Dia. 40.000 (estimated, for two)
PEMax 0.000

Desired Qtc 0.71
Vb 72.18
Fb 30.8
F3 30.8


  • View the previous message in this thread
  • Go to the top of this thread
  • View entire thread
  • Posted with TalkShop version 2.76 BETA

    [Previous Message] [Next Message]




    Follow Ups:

    [ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]


    websmall.gif (584 bytes)