[Previous Message]
[Next Message]
|
| Date: |
March 24, 2005 at 01:36:52 |
| From: |
Van, [sub40-13.labs.uidaho.edu] |
| Subject: |
Re: infinite baffle better or what? |
|
|
|
|
Not to be double posting but I found some on the exact measurements and model etc.
9.75"x20.5"x22.75" big box
4.25"x15.25"x19.5" small box
model Altec Lansing ACS90
Drivers (per satellite)- 1 full range 3-inch speaker
Satellite power (per channel)- 4.5 W at < 0.8% THD
Frequency response- 90 Hz - 20 kHz
Sensitivity- 300-mV input for full output
Treble - 7 dB at 10 kHz
Input impedance - > 10,000 ohms
http://support.dell.com/support/edocs/acc/61408/Graphics.htm
that is the link, I also am running the speakers off of the amp that came with them (inside the little boxes)
But any reason a long flat box would make better base then a real infinite baffle?
|
|
|
| View the previous message in this thread
Go to the top of this thread
View entire thread |
Posted with TalkShop version
2.76 BETA |
[Previous Message]
[Next Message]
|
|
|
Follow Ups: |
|
|
|
[
The Subwoofer DIY Page - Discussion Forum ] [ FAQ ] |
|
