The Subwoofer DIY Page v1.1
[ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]

Choosing a system
Sealed Systems
Ported Systems
Passive Radiator Systems
4th Order Bandpass Systems
6th Order Bandpass Systems
Transmission Line Systems
Dipole Systems
Car Audio Subwoofers

[Previous Message] [Next Message]

Date: August 12, 2003 at 15:12:43
From: leadbelly, [m209-202-71-56.on.tac.net]
Subject: Somebody please help (Doug?), because now I am really confused...


Doug said 1.66 cu ft for Q=0.707. But if I put the published specs from Madisound into the sealed.xls spreadsheet, I get 2.48 cu ft for Q=0.707.

Is this just because Doug assumed lots of stuffing insulation, or I am looking at a bad set of specs on the Swan?


  • View the previous message in this thread
  • Go to the top of this thread
  • View entire thread
    		•

    Posted with TalkShop version 2.74

    [Previous Message] [Next Message]



    Follow Ups:

    [ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]


    websmall.gif (584 bytes)