[Previous Message]
[Next Message]
|
| Date: |
August 08, 2003 at 21:50:14 |
| From: |
BW, [pcp01474841pcs.montvl01.pa.comcast.net] |
| Subject: |
High Level Out hi-pass circuit question |
|
|
|
|
On the PE 150W plate amp, the hi-level outputs have a 125 Hz 6
db/octave hi-pass filter at 8 ohms. How would the crossover
frequency change if I were to use a 4 ohm speaker with the hi-
level outputs? Would that raise the crossover frequency to 250
Hz? And if that is the case, could I just get a cap that's twice the
value of the one currently in the amp to make it a 125 Hz 6 db/
octave hi-pass at 4 ohms? Thanks for any help/clarification.
|
|
|
| View entire thread |
Posted with TalkShop version
2.74 |
[Previous Message]
[Next Message]
|
|
|
Follow Ups: |
|
|
|
[
The Subwoofer DIY Page - Discussion Forum ] [ FAQ ] |
|
