The Subwoofer DIY Page v1.1
[ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]

Choosing a system
Sealed Systems
Ported Systems
Passive Radiator Systems
4th Order Bandpass Systems
6th Order Bandpass Systems
Transmission Line Systems
Dipole Systems
Car Audio Subwoofers

[Previous Message] [Next Message]

Date: August 07, 2003 at 20:17:47
From: BW, [pcp01474841pcs.montvl01.pa.comcast.net]
Subject: Re: Suggestions on driver arrangement in ported box. (Car)


two isobaric pairs in ported boxes would be a sick setup if you
ask me! but if you still want loud, clean, and small box
requirements, just put all 4 10's in a sealed box. with either amp
you plan to get you will have plenty of power for almost any
configuration you could make. i personally would go with all 4 in
a sealed box or give each their own separate airspace (all of equal
volume of course).


  • View the previous message in this thread
  • Go to the top of this thread
  • View entire thread
  • Posted with TalkShop version 2.74

    [Previous Message] [Next Message]




    Follow Ups:

    [ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]


    websmall.gif (584 bytes)