| The Subwoofer DIY Page - Discussion Forum
|
[
The Subwoofer DIY Page - Discussion Forum ] [ FAQ ] |
|
[Previous Message]
[Next Message]
|
|
Date: August 05, 2003 at 11:50:20
From: CC, [142.66.54.19]
Subject: 10" Dayton Titanic MK2 Design |
|
|
Hello,
I have a 10" Dayton Titanic MK2 and a 250w plate amp for a subwoofer design project. I'd like to build a vented cabinet with a Fb of around 25 Hz, in a relatively small box...the manufacturer recomends a volume of 1.41 ft3 with a 3" X 19.3" port. My question is how the heck do you got a 19.3" port into a 1.41 ft3 box with a baffel that long. What are my other options. How big of a box would I have to build to get the same Fb without going to a smaller port diameter?
|
|
|
| View entire thread |
Posted with TalkShop version
2.74 |
[Previous Message]
[Next Message]
|
|
|
Follow Ups: |
|
|
[
The Subwoofer DIY Page - Discussion Forum ] [ FAQ ] |
|