The Subwoofer DIY Page - Discussion Forum

[ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]

[Previous Message] [Next Message]

Date: August 04, 2003 at 05:53:42
From: Adrian Mack, [dialup-196-64.wasp.net.au]
Subject: Various 18" motors

URL: My website, Peerless XLS 12 Dual PR Sub Project, 18LW1400 vented sub, Horns, etc.....



Hi Tako!

Theres a number of drivers that will work excellantly for your application. I personally use the 18-Sound 18LW1400 18" bass driver, and its really great, with very low distortion and very high output. JBL also make some excellant 18" motors, including the 2241H, 2242H and 2245H. I would also consider the TAD 1602, which is also a really great part. See my website for details on my sub, http://www.geocities.com/adrian_mack/homepage.html, and then click on "Eighteen Sound Vented Sub".

The Aura 1808 has good T/S specs, but their website does not have enough info, such as distortion graphs. I suspect it is a good motor, but theres just not enough on their website to make an informed decision. But I strongly doubt you'll end up with anything disappointing from this part.

Anyhow, take a look at my website, and also those drivers and post back here if you need more advice. These motors work best in 7 to 10ft^3 vented cabinets.

Adrian


  • View the previous message in this thread
  • Go to the top of this thread
  • View entire thread
    		•

    Posted with TalkShop version 2.74

    [Previous Message] [Next Message]



    Follow Ups:

    [ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]