| The Subwoofer DIY Page - Discussion Forum
|
[
The Subwoofer DIY Page - Discussion Forum ] [ FAQ ] |
|
[Previous Message]
[Next Message]
|
|
Date: July 29, 2003 at 07:20:01
From: Vlad S., [211.26.178.206]
Subject: Re: Volume to Measurement |
|
|
Thanks dood, I will post a picture up on my website as soon as I finish the building. I decided, with plate amp and such that the box will be 18"x13"x13" which allows the port hole to be on the front, and the sub will be down firing, the back plate amplifier only goes 8cm deep so it shouldn't be a problem trying to fit the PVC piping around.
One thing however, will I just let the PVC pipe hang there? I will glue it at the mouth, but what else should I do? Or will it be strong enough to hold it's self? I will put sound absorbing material on the walls as well, so vibrations against the walls won't be a problem.
Anyway, thanks Adrian (I have visited your site many times, and it is very interesting).
|
|
|
| View the previous message in this thread
Go to the top of this thread
View entire thread |
Posted with TalkShop version
2.74 |
[Previous Message]
[Next Message]
|
|
|
Follow Ups: |
|
|
[
The Subwoofer DIY Page - Discussion Forum ] [ FAQ ] |
|