| The Subwoofer DIY Page - Discussion Forum
|
[
The Subwoofer DIY Page - Discussion Forum ] [ FAQ ] |
|
[Previous Message]
[Next Message]
|
|
Date: July 28, 2003 at 17:32:48
From: Rory, [0-1pool46-6.nas18.portland1.or.us.da.qwest.net]
Subject: building a box for my JL audio 12w6 AE |
|
|
i recently bought a 12w6 AE off of ebay to replace the 12w0 i had that had a bad voice coil on it. as of right now i have the w6 in the cheap box i had the w0 in. i was hoping to be able to buy a ported box to put the sub in but when i went to try and put a couple in the trunk of my 99 mustang nothing would fit in the rediculously small trunk. fourtantely my dad is good w/ wood and can build me a box but i don't know how i should go about making the box. if someone could help keeping in mind that it has to be very small and that i don't know much about car audio so if you could keep the language simple that would be awesome, thanks!
~Rory
|
|
|
|
Posted with TalkShop version
2.74 |
[Previous Message]
[Next Message]
|
|
|
Follow Ups: |
|
|
[
The Subwoofer DIY Page - Discussion Forum ] [ FAQ ] |
|