The Subwoofer DIY Page - Discussion Forum

[ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]

[Previous Message] [Next Message]

Date: July 27, 2003 at 04:00:24
From: Adrian Mack, [dialup-196-167.wasp.net.au]
Subject: Re: subs

URL: My website, Peerless XLS 12 Dual PR Sub Project, 18LW1400 vented sub, Horns, etc.....



Hi Derek,

Adding a zobel would be benificial, although I've not seen any plots of the current transfer function. Are you unsatisfied with the way it sounds now though? These caps cost money relative to resistors, and you'll need a zobel for each midrange driver. In any case, the Zobel will eliminate any peaking caused by voice coil inductance.

In my past post I told you to connect the cap and resistor in parallel with the driver. That is right, I forgot to mention though that the cap and resistor should be connected in series, and that unit placed in parallel with the driver.

Adrian


  • View the previous message in this thread
  • Go to the top of this thread
  • View entire thread
    		•

    Posted with TalkShop version 2.74

    [Previous Message] [Next Message]



    Follow Ups:

    [ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]