The Subwoofer DIY Page - Discussion Forum

[ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]

[Previous Message] [Next Message]

Date: March 24, 2003 at 07:38:21
From: norman bates, [cache-dm08.proxy.aol.com]
Subject: first of all 900watts rms is into a resistor......


so it hopefully yields 450 watts into an actual speaker.

Yes you can run hundreds of watts on 1 speaker. I swore I heard an improvement when I bridged my crown dc300a for 600 watts rms into a 8ohm w-bin.

Speakers heat up as you put power in. Qts increases, read up on power compression on the jbl website tech stuff.

200 watts is 3db more power than 100 watts. 3db is not twice as loud in the bass region. most speakers won'


  • View the previous message in this thread
  • Go to the top of this thread
  • View entire thread
    		•

    Posted with TalkShop version 2.74

    [Previous Message] [Next Message]



    Follow Ups:

    [ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]