| The Subwoofer DIY Page - Discussion Forum
|
[
The Subwoofer DIY Page - Discussion Forum ] [ FAQ ] |
|
[Previous Message]
[Next Message]
|
|
Date: July 30, 2002 at 23:54:54
From: Corey, [flubber.conectiv.com]
Subject: Re: My first box design, please tell me if it works. |
URL: My Truck |
|
Use MDF (medium density fiberboard) for the box, I would suggest two 3/4" thick layers, they could be staggered to form stronger joints. Also I would suggest bracing inside for each wall, due to their size. Sealing the joints of the entire box other than the glue used in construction is a plus, I found GE Silicon II works best. If covering the box, then use spray adhesive from 3M, it comes in a black can. Spray both the box and the fabric, let set up then stick. I didn't run your calculated box size, I'm at work, but if you attain the desired tuning frequency with your box volume then run with it. I defer the checking of the box volume to others who can run Isaac's program.
Have fun!!! And don't rush!
< Corey
|
|
|
| View the previous message in this thread
Go to the top of this thread
View entire thread |
Posted with TalkShop version
2.73 |
[Previous Message]
[Next Message]
|
|
|
Follow Ups: |
|
|
[
The Subwoofer DIY Page - Discussion Forum ] [ FAQ ] |
|