Date: July 26, 2002 at 17:02:03 From:Max Christoffersen, [p45.hn1.wave.co.nz] Subject: DIY Velodyne..!
I have a dead Velodyne.
It is a 1990 model Servo 1200. Velodyne advise that they no longer offer a recone kit for this model. Extraordinary but true.
My question is what to do? I now have a nice paperweight Velodyne. So what replacement 12" driver do I use if any? And what to do about the servo circuit?
The specs on the driver are:
Linear travel 9/16" peak to peak: Copper voice coil 2 3/8" diameter; 1.1" length; magnet 56 oz; resin impregnated driver.