Bandwith with an isobarik configuration

The Subwoofer DIY Page - Discussion Forum

[ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]

Date: June 25, 2002 at 13:10:05
From: Jean-Pierre Montuelle, [alille-205-1-1-228.abo.wanadoo.fr]
Subject: Bandwith with an isobarik configuration

Hello

I 'm thinking about an isobarik configuration to extend the bass response of a little fullrange loudspeaker ( Fostex FE103 or FE 127 , not yet decided) .
In my mind , the crossover ( 1st order ) should be around 300/400 hz , to avoid the resonance of the drivers and to extend power handling of the fullrange .
But i'm not sure that an isobarik config. can go up to 300/400 hz .
Has anyone experiment isobarik configuration for other than subwoofer goal ?
Thanks for response
JPM
PS : the woofers are Focal 8v416J ( i've got them in my stock since a couple of years) and they will be mounted one behind the other ( face to rear ) , with a little chamber between them .

View entire thread

Posted with TalkShop version 2.73 - BETA

[Previous Message] [Next Message]

Follow Ups:

Re: Bandwith with an isobarik configuration Brian 25-Jun-2002 22:54:40 (0)

[ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]