Date: April 02, 2002 at 19:25:10 From: Brian, [gnd210-115.caribsurf.com] Subject: Re: Sub/amp configuration questions (lots of them)
>Wiring the coils in series would raise the Qts >slightly (there is a formula for how much on Isaac >MCN's page),
The only way I can see Qts being raised by anything other than a completely negligable amount is if the cable used to wire the coils in series has appreciable resistance. So, keep the cables short and use 16 guage or better, and don't worry about the change in Qts.