The Subwoofer DIY Page - Discussion Forum

[ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]

[Previous Message] [Next Message]

Date: April 02, 2002 at 11:23:02
From: Brian Owens, [newhq.paccar.com]
Subject: Re: Sub/amp configuration questions (lots of them)

URL: My Webpage. . .


Funny, this was just posted on madisound board:

= Ive built a dual 10" sub. Each sub has
= dual 6ohm coils. So, of course, the question
= is; do I series the coils and parallel the
= drivers, or parallel the coils and series
= the drivers? Im leaning toward series coils.
= I figure if I ever want to drive them
= seperatly, in stererereo, 3 ohms might be
= pushing it. What do you think? Does it
= matter? Tnx!

I'd go for Series VC and parrallel the drivers. This will ensure that there is no interaction beteen the back EMF of the drivers. With Parrallel connection as I suggest the back EMF of each drivers is damped directly by the amplifer.

best regards,
Johnny

******************************************

Brian


  • View the previous message in this thread
  • Go to the top of this thread
  • View entire thread
    		•

    Posted with TalkShop version 2.73 - BETA

    [Previous Message] [Next Message]



    Follow Ups:

    [ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]