Date: April 02, 2002 at 04:30:28 From: chris, [dhcp024-209-035-016.neo.rr.com] Subject: Stll in need
Here are the specks on the amp REV635 Power Max (2 Ohm) 600w x 2 Power RMS (4 Ohm) 200w x 2 Power Bridged 300w x 1 Tri-Mode Built-in X-Over hi & lo pass Bass Boost 0 - +18dB Inputs line & spkr line Line Out * S/N Ratio 105 d T.H.D. 0.01% Dim.: 10 5/8"W x L-15 3/4"
So since i have 2 dvc 12's that are rated for 350 rms 650 peak I want the 4 ohm 200x2 option But How do i wire the Voice coils to maintain a 4ohm load. I am using BOTH left and right channel on the amp per amp instructions so i can utilize the 4ohm levels. So if anyone could do me a simple diagram or explanation, it would be of help.