Wiring L and R chanel of existing amp to one subwoofer

The Subwoofer DIY Page - Discussion Forum

[ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]

Date: April 01, 2002 at 09:58:15
From: nermin, [195.222.32.14]
Subject: Wiring L and R chanel of existing amp to one subwoofer

Please I need an answer:
Can I build subwoofer box with 2 drivers (in one box) and connect + and - of L and R channel on each driver + and - respectively ?
Idea is to avoid using extra amplifire for subwoofer box. I intent to realize this in car and to use rear amplifiers to drive subwoofer box.
If You can give me the answer for isobarik and non isobarik configuration of two driver, I would be grateful.
I use WinISD beta version software and there is option for 2 driver in pair. Do I have to wire them in parallel or there is possibility that I asking for above.

Thanks beforehand .... and sorry about bad English

Best regards

View entire thread

Posted with TalkShop version 2.73 - BETA

[Previous Message] [Next Message]

Follow Ups:

Re: Wiring L and R chanel of existing amp to one subwoofer Jason U. 01-Apr-2002 17:20:12 (0)

Re: Wiring L and R chanel of existing amp to one subwoofer Corey 01-Apr-2002 14:22:33 (0)

[ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]