| The Subwoofer DIY Page - Discussion Forum
|
[
The Subwoofer DIY Page - Discussion Forum ] [ FAQ ] |
|
[Previous Message]
[Next Message]
|
|
Date: March 30, 2002 at 23:40:01
From: chris, [dhcp024-209-035-016.neo.rr.com]
Subject: Re: Brian Owens This one is for you |
|
|
|
more to add sorry. I have the DVC wired in series and both feeds wired to the amp bridged. I believe the amp is 500max bridged. I can not find any info on the amp. My box does NOT share the volume i have a divider in there all is 3/4 MDF and drywall screwes and a Hella lot of glue and 2 coats of 100% silicone the subs are 12" hollywood excursions model 1255-d 4ohm per Voice coil. amp as i said alpine head unit is a chitty Pioneer No EQ's No Epicenters I use the built in crossover in the amp. It has a bass boos that i might try disabling. Wife and I have had conversations over all the trunk space and all i want to do and she is now supportive instead of argumentative. As for the baby situation She utilizes the back seat. No dynomat or anything like that yet. Car is a 1988 tempo ALL WHEEL DRIVE <---- Next project. I think thats all the info you may need. Primary problem is With the radio set all to center and 0 too much bass so i go -4 on the bass. And the gain on the amp is 1/4 the way up. And they suggested 2 more. I dont get it.....
|
|
|
| View the previous message in this thread
Go to the top of this thread
View entire thread |
Posted with TalkShop version
2.73 - BETA |
[Previous Message]
[Next Message]
|
|
|
Follow Ups: |
|
|
[
The Subwoofer DIY Page - Discussion Forum ] [ FAQ ] |
|