| The Subwoofer DIY Page - Discussion Forum
|
[
The Subwoofer DIY Page - Discussion Forum ] [ FAQ ] |
|
[Previous Message]
[Next Message]
|
|
Date: March 10, 2002 at 12:08:16
From: JIMMY, [pool-63.49.20.36.mmph.grid.net]
Subject: Peerless 10" XLS with 10" or 12" Passive Radiator? Filter Options? |
|
|
|
I am building a pair of 1 cu ft subs with the new Peerless 10" XLS and passive radiator. I prefer to use a 10" passive radiator, however others have stated the 12" passive radiator is much better. I am adjusting the plate amps for a 6dB boost starting at 28Hz to flaten the bass curve and will only use the subs to about 50Hz. The plate amp has a 12dB roll off x-over built inside and I'll need another 12dB of filtering. I plan to drive directly off of the Denon receiver using the plate amps high level input. The Denon front speakers will be set to large thus connecting the subs in stereo. What is available in an aftermarket 12dB filter? Tnx all, Jimmy
|
|
|
|
Posted with TalkShop version
2.71-8 BETA |
[Previous Message]
[Next Message]
|
|
|
Follow Ups: |
|
|
[
The Subwoofer DIY Page - Discussion Forum ] [ FAQ ] |
|