| The Subwoofer DIY Page - Discussion Forum
|
[
The Subwoofer DIY Page - Discussion Forum ] [ FAQ ] |
|
[Previous Message]
[Next Message]
|
|
Date: May 06, 2001 at 01:49:27
From: Bill Mac., [198.142.108.71]
Subject: Re: I forgot to add... |
|
|
Isaac
Thanks for your reply.
I was just interested in what other "hobbiests" might have to say. I used WinlSD as a guide to enclosure dimensions the TS parementers for the Shiva = a 63L box, however after talking to Adire Audio it seemed with the Shiva up to 120L would be OK.
I am not what you might call a audio enthusiast just a guy who likes music/HT and decided to make a subwoofer (cheaper and much beter than what I listened to in shops). Now that the sub works OK 2way book shelf next, after that who knows.
Thanks again for your reply, I was going to use fibreglass batts as used in ceiling insulation as I read in a forum or discussion paper that it was better than polyester. I decided against that because I was unsure whether the fibreglass discussed was the same. Also I put in my ceiling and it was not pleasant to work with.
|
|
|
| View the previous message in this thread
Go to the top of this thread
View entire thread |
Posted with TalkShop version
2.71-3 |
[Previous Message]
[Next Message]
|
|
|
Follow Ups: |
|
|
[
The Subwoofer DIY Page - Discussion Forum ] [ FAQ ] |
|