| The Subwoofer DIY Page - Discussion Forum
|
[
The Subwoofer DIY Page - Discussion Forum ] [ FAQ ] |
|
[Previous Message] [Next Message] |
|
Date: February 17, 2001 at 15:27:53
From: The Beginner, [t2o204p31.telia.com]
Subject: Re: Need bracing /dampening advise for a large vented box |
|
|
|
Just buy LOTS, and I mean LOTS of woodglue, then you "paint" the side you want to add a "wall" to, donīt make the layer too thin. Then you lay the wall down on the "painted" side and put something REALY heavy (probably many heavy things". When I added some thin ply, for the look, I placed a car battery and a speaker box (made of 2.5cm MDF, 87 liters, heavy!) on the side, then I waited for it to dry ( a day or two). Then I cut the edges off and sand them, and then I did the same over and over till the box was coverd in ply.
|
|
|
| View the previous message in this thread
Go to the top of this thread
View entire thread |
Posted with TalkShop version
2.71 BETA |
[Previous Message] [Next Message] |
|
|
Follow Ups: |
|
|
[
The Subwoofer DIY Page - Discussion Forum ] [ FAQ ] |
|