The Subwoofer DIY Page - Discussion Forum

[ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]


[Previous Message] [Next Message]

Date: February 11, 2001 at 13:12:37
From: Ben, [202.67.94.103]
Subject: Re: Splitting mdf: been there done that....


Wood bracing is any wood that is used to hold the box together. What it looks like depends on its dimentions.I have found that its better not to use anything less than 30x30mm beams. The type of wood you use depends on how much you want to spend some will say that hard woods are best when used but they will cost.Pine works well if you want to keep costs down.

Ben


  • View the previous message in this thread
  • Go to the top of this thread
  • View entire thread
  • Posted with TalkShop version 2.70

    [Previous Message] [Next Message]




    Follow Ups:


    [ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]